Thermal Managment of a Vehicle's Underhood and Underbody using Appropriate Math-Based Analytical Tools and Methodologies
Date Published: April 2007
Author(s): Shailendra Kaushik - General Motors Corp.
More info on this paper.
Multi-Disciplinary Aerodynamics Analysis for Vehicles: Application of External Flow Simulations to Aerodynamics, Aeroacoustics and Thermal Management of a Pickup Truck
Date Published: April 2007
Author(s): Bradley D. Duncan - Exa Corp., Sivapalan Senthooran - Exa Corp., Dena Hendriana - Exa Corp., Pradeep Sivakumar - Exa Corp., David Freed - Exa Corp., Mark E. Gleason - DaimlerChrysler Corp., Deborah C. Hall - DaimlerChrysler Corp.
More info on this paper.
Advances in Automated Coupling of CFD and Radiation
Date Published: April 2008
Author(s): Christian Rauch - The Virtual Vehicle Competence Center (vif), Thomas Hörmann - The Virtual Vehicle Competence Center (vif), Sebastian Jagsch - Magna Steyr Fahrzeugtechnik AG & CO KG, Raimund Almbauer - ICE-THD, Graz University of Technology
More info on this paper.
Reduction in Vehicle Temperatures and Fuel Use from Cabin Ventilation, Solar-Reflective Paint, and a New Solar-Reflective Glazing (Invited Presentation from 2007 SAE World Congress - SAE Paper Number 2007-01-1194)
Date Published: April 2007
Author(s): John P. Rugh - National Renewable Energy Laboratory, Larry Chaney - National Renewable Energy Laboratory, Jason Lustbader - National Renewable Energy Laboratory, John Meyer - Visteon Climate Control, Mukesh Rustagi - PPG Industries Inc., Kurt Olson - PPG Industries Inc., Rupert Kogler - Webasto AG
More info on this paper.
Automated Radiation Modeling for Vehicle Thermal Management
Date Published: February 1995
Author(s): Allen R. Curran - Michigan Technological Univ., Keith R. Johnson - Michigan Technological Univ., Eric A. Marttila - Michigan Technological Univ., Scott P. Dudley - Ford Motor Co.
More info on this paper.
Investigation of Thermal and Fluid Characteristics in Automotive Headlights
Date Published: September 2005
Author(s): H. P. Bensler - Volkswagen AG, A. de Risi - Universit\ab di Lecce, C. Freek - Volkswagen AG, E. Montefrancesco - Universit\ab di Lecce, D. Heath - Ricardo Gmbh
More info on this paper.
Functional and Material Acoustic Optimization integrated into Underbody Systems for Vehicle Performance Improvement
Date Published: May 2007
Author(s): Maurizio Mantovani - Rieter Automotive Systems, Dirk Lehmann - Rieter Automotive Systems
More info on this paper.
Technology Transfer: An Enabler for Army Transformation
Date Published: March 2003
Author(s): Adam H. Alaweih - US Army Tank Automotive Command, Peter Gerard DiSante - National Automotive Center
More info on this paper.
Wall Temperatures and Airflow Prediction in Automotive Headlights Utilizing the CFD Methodology
Date Published: November 2006
Author(s): Edinilson Alves Costa - Ford Motor Company do Brasil, Luis Alves dos Santos - Ford Motor Company do Brasil
More info on this paper.
Whats New At SAE 2005
Date Published: March 2005
Author(s): Unknown
More info on this paper.
What's New at ComVEC 2006
Date Published: February 2005
Author(s): Unknown
More info on this paper.
Heat Management in a Sound Package Development
Date Published: November 2004
Author(s): Rogerio Martins - Ford Motor Company Brazil, Marcio Concalves Pinto - Ford Motor Company Brazil, Edinilson Costa - Ford Motor Company Brazil, Luciano Driemeier - Ford Motor Company Brazil, Rafael Clemente - Ford Motor Company Brazil
More info on this paper.
Zero Prototype Approach in the Development of a Plastic Automotive Component
Date Published: November 2004
Author(s): Verqnica Wildberger Lisbqa - Ford Motor Co., Aguinaldo J. Cajuhi - Ford Motor Co., Rodrigo Nicoletti - MSX International do Brasil, Wesley N. Mascarenhas - Trilogy International do Brasil
More info on this paper.
Thermal Modeling and Imaging of As-built Vehicle Components
Date Published: April 2006
Author(s): Andreas F. Koschan - Univ. of Tennessee, Priya Govindasamy - Univ. of Tennessee, Sreeenivas Sukumar - Univ. of Tennessee, David Page - Univ. of Tennessee, Mongi Abidi - Univ. of Tennessee, David Gorsich - US Army RDECOM
More info on this paper.
Analysis of the Impact of Reduced Vehicle Thermal Load on AC Fuel Use
Date Published: 2006
Author(s): Larry Chaney
More info on this paper.
Whats New At SAE 2005
Date Published: February 2005
Author(s): Unknown
More info on this paper.
The publications below are from the Vehicle Thermal Managment Systems Conference & Exhibition. Copies of the articles may be purchased from Mike Claxton of the IMechE Library; Email him the title of the article you are interested in. The publications involve thermal analysis with RadTherm Software. This website provides the title and publication / presentation / information only.
Effect of Several Engine Encapsulation Concepts on Emissions, Consumption and on Thermal Safety of a Vehicle
Meeting Where Presented: Vehicle Thermal Management Systems Conference & Exhibition, May 2007, Nottingham, UK
AUTHOR(S): H De Ciutiis, T Bürgin, L Gorlato - Rieter Automotive Systems, Switzerland
Investigation of Heat Transfer and Evaporation Processes in Automotive Headlights
Meeting Where Presented: Vehicle Thermal Management Systems Conference & Exhibition, May 2007, Nottingham, UK
AUTHOR(S): H P Bensler - Volkswagen AG, Germany; A Leefken, D Heath - Ricardo Deutschland GmbH, Germany
Transient Computation of a Battery’s Temperature in an Enclosure
Meeting Where Presented: Vehicle Thermal Management Systems Conference & Exhibition, May 2007, Nottingham, UK
AUTHOR(S): F Michel, H Reister - DaimlerChrysler AG, Germany; B Desmet - Université de Valenciennes et du Hainaut-Cambrésis, France
An Overview of Vehicle Test and Analysis Results from NREL's A/C Fuel Use Reduction Research
Meeting Where Presented: Vehicle Thermal Management Systems Conference & Exhibition, May 2007, Nottingham, UK
AUTHOR(S): D Bharathan, L Chaney, R B Farrington, J Lustbader, M Keyser, J P Rugh - National Renewable Energy Laboratory, USA
Analysis of Flow Phenomena on an Acoustic Roller Dynamometer in Order to Analyse the Flow Through the Engine Compartment and on the Underbody for Thermal Applications
Meeting Where Presented: Vehicle Thermal Management Systems Conference & Exhibition, May 2007, Nottingham, UK
AUTHOR(S): T Moshammer, S Jagsch, C Kussmann, H Pischler - MAGNA STEYR
Fahrzeugtechnik, Austria
Evaluation of Steady and Transient CFD Methods for Vehicle Temperature Prediction on the Basis of a Heatshield Test Rig
Meeting Where Presented: Vehicle Thermal Management Systems Conference & Exhibition, May 2007, Nottingham, UK
AUTHOR(S): E Bendell, M Hauenstein - Rieter Automotive Systems, Switzerland
Lattice-Boltzmann Flow Simulation of the Modified SAE Model with Heated Plug Including Conduction and Radiation Effects
Meeting Where Presented: Vehicle Thermal Management Systems Conference & Exhibition, May 2007, Nottingham, UK
AUTHOR(S): S Jelic, E Fares - Exa GmbH, Germany; A Alajbegovic - Exa Corporation, USA
Thermal Radiation Benchmarks for the Automotive Industry
Meeting Where Presented: Vehicle Thermal Management Systems Conference & Exhibition, May 2007, Nottingham, UK
AUTHOR(S): C Rauch - The Virtual Vehicle Research Center GmbH (vif), Austria; T Moshammer - MAGNA Steyr Fahrzeugtechnik AG & CO KG, Austria; R Almbauer - Graz University of Technology, Austria
Numerical Investigations of Thermal Soak
Meeting Where Presented: Vehicle Thermal Management Systems Conference & Exhibition, May 2007, Nottingham, UK
AUTHOR(S): E P Weidmann, J Wiedemann - IVK/FKFS University of Stuttgart, Germany; T Binner, H Reister - DaimlerChrysler AG, Germany
The publications below are available for purchase from the SAE website. The publications involve thermal analysis with RadTherm Software. This website provides the title and publication / presentation / information only.
Improving Cabin Thermal Comfort by Controlling Equivalent Temperature
SAE Document Number: 2009-01-3265
Meeting Where Presented: NA
AUTHOR(S):Allen Curran, Scott Peck, Tony Schwenn, Mark Hepokoski
http://papers.sae.org/2009-01-3265
Cooling Analysis of a Passenger Car Disk Brake
SAE Document Number: 2009-01-3049
Meeting Where Presented: NA
AUTHOR(S): Thomas Christian Schuetz
http://papers.sae.org/2009-01-3049
Thermal Load Reduction of Truck Tractor Sleeper Cabins
SAE Document Number: 2008-01-2618
Meeting Where Presented: NA
AUTHOR(S): Kenneth Proc, Larry Chaney, Eric Sailor
http://papers.sae.org/2008-01-2618
Thermal Analysis and Simulations for Optimizing HVAC Load on Heavy Trucks
SAE Document Number: 2008-01-2657
Meeting Where Presented: NA
AUTHOR(S): Amit B. Shah, Craig M. Cless, John S. Curlee, Jeremy Edmondson
http://papers.sae.org/2008-01-2657
Modeling Human Thermoregulation as a Means of Evaluating Heat Stress Events
SAE Document Number: 2008-01-2273
Meeting Where Presented: NA
AUTHOR(S): Allen Curran, Peter Rynes
http://papers.sae.org/2008-01-2273
Advances in Automated Coupling of CFD and Radiation
SAE Document Number: 2008-01-0389
Meeting Where Presented: NA
AUTHOR(S): Christian Rauch, Thomas HÃrmann, Sebastian Jagsch, Raimund Almbauer
http://papers.sae.org/2008-01-0389
Experimental and Numerical Investigations of Thermal Soak
SAE Document Number: 2008-01-0396
Meeting Where Presented: NA
AUTHOR(S): Ernst Peter Weidmann, Heinrich Reister, Thomas Binner
http://papers.sae.org/2008-01-0396
Functional and Material Acoustic Optimization integrated into Underbody Systems for Vehicle Performance Improvement
SAE Document Number: 2007-01-2350
Meeting Where Presented: NA
AUTHOR(S): Maurizio Mantovani, Dirk Lehmann
http://papers.sae.org/2007-01-2350
Thermal Managment of a Vehicle's Underhood and Underbody using Appropriate Math-Based Analytical Tools and Methodologies
SAE Document Number: 2007-01-1395
Meeting Where Presented: NA
AUTHOR(S): Shailendra Kaushik
http://papers.sae.org/2007-01-1395
Multi-Disciplinary Aerodynamics Analysis for Vehicles: Application of External Flow Simulations to Aerodynamics, Aeroacoustics and Thermal Management of a Pickup Truck
SAE Document Number: 2007-01-0100
Meeting Where Presented: NA
AUTHOR(S): Bradley D. Duncan, Sivapalan Senthooran, Dena Hendriana, Pradeep Sivakumar, David Freed, Mark E. Gleason, Deborah C. Hall
http://papers.sae.org/2007-01-0100
Reduction in Vehicle Temperatures and Fuel Use from Cabin Ventilation, Solar-Reflective Paint, and a New Solar-Reflective Glazing
SAE Document Number: 2007-01-1194
Meeting Where Presented: Invited Presentation from 2007 SAE World Congress
AUTHOR(S): John P. Rugh, Larry Chaney, Jason Lustbader, John Meyer, Mukesh Rustagi, Kurt Olson, Rupert Kogler
http://papers.sae.org/2007-01-1194
Wall Temperatures and Airflow Prediction in Automotive Headlights Utilizing the CFD Methodology
SAE Document Number: 2006-01-2646
Meeting Where Presented: NA
AUTHOR(S): Edinilson Alves Costa, Luis Alves dos Santos
http://papers.sae.org/2006-01-2646
Analysis of the Impact of Reduced Vehicle Thermal Load on AC Fuel Use; SAE Automotive Alternate Refrigerant Systems Symposium
SAE Document Number: NA
Meeting Where Presented: NA
AUTHOR(S): Larry Chaney
http://www.sae.org/events/aars/presentations/2006-larrychaney.pdf
Thermal Modeling and Imaging of As-built Vehicle Components
SAE Document Number: 2006-01-1167
Meeting Where Presented: NA
AUTHOR(S): Andreas F. Koschan, Priya Govindasamy, Sreeenivas Sukumar, David Page, Mongi Abidi, David Gorsich
http://papers.sae.org/2006-01-1167
Investigation of Thermal and Fluid Characteristics in Automotive Headlights
SAE Document Number: 2005-24-069
Meeting Where Presented: NA
AUTHOR(S): H. P. Bensler, A. de Risi, C. Freek, E. Montefrancesco, D. Heath
http://papers.sae.org/2005-24-069
Heat Management in a Sound Package Development
SAE Document Number: 2004-01-3310
Meeting Where Presented: NA
AUTHOR(S): Rogaerio Martins, Maarcio Conacalves Pinto, Edinilson Costa, Luciano Driemeier, Rafael Clemente
http://papers.sae.org/2004-01-3310
Zero Prototype Approach in the Development of a Plastic Automotive Component
SAE Document Number: 2004-01-3300
Meeting Where Presented: NA
AUTHOR(S): Veraqnica Wildberger Lisbaqa, Aguinaldo J. Cajuhi, Rodrigo Nicoletti, Wesley N. Mascarenhas
http://papers.sae.org/2004-01-3300
Multi-Dimensional Thermal Properties of Insulated Heat Shield Material Systems
SAE Document Number: J2609
Meeting Where Presented: NA
AUTHOR(S): Formed Heat Shield Committtee
http://standards.sae.org/j2609_200312
Technology Transfer: An Enabler for Army Transformation
SAE Document Number: 2003-01-1377
Meeting Where Presented: NA
AUTHOR(S): Adam H. Alaweih, Peter Gerard DiSante
http://papers.sae.org/2003-01-1377
Automated Radiation Modeling for Vehicle Thermal Management
SAE Document Number: 950615
Meeting Where Presented: NA
AUTHOR(S): Allen R. Curran, Keith R. Johnson, Eric A. Marttila, Scott P. Dudley
http://papers.sae.org/950615
Finite Difference Heat Transfer Model of a Steel-clad Aluminum Brake Rotor
SAE Document Number: 2005-01-3943
Meeting Where Presented: 23rd Annual Brake Colloquium and Exhibition, October 2005, Orlando, FL, USA
AUTHOR(S): Jim E. Hertel, Jared Suster, Justin Hawley, Xiaodi Huang - Michigan Technological Univ.
http://www.sae.org/servlets/productDetail?PROD_TYP=PAPER&PROD_CD=2005-01-3943
Use of CFD to Support Heat Management CAE Simulation
SAE Document Number: 2003-01-3559
Meeting Where Presented: NA
AUTHOR(S): Luiz Morgado - Ford Motor Company do Brasil; Luciano Driemeier - MSX International do Brasil
http://www.sae.org/servlets/productDetail?PROD_TYP=PAPER&PROD_CD=2003-01-3559
Improvement of Process for Heat Shielding Under Body of Vehicles Against Exhaust System Thermal Effects Aided By FEA
SAE Document Number: 2002-01-3476
Meeting Where Presented: NA
AUTHOR(S): Josae Antonio Felicio, Jr. - Ford Motor Co.
http://www.sae.org/servlets/productDetail?PROD_TYP=PAPER&PROD_CD=2002-01-3476
Underhood Temperature Analysis in Case of Natural Convection
SAE Document Number: 2005-01-2045
Meeting Where Presented: Vehicle Thermal Management Systems Conference & Exposition, May 2005, Toronto, ON, CANAD, Session: Engine and Engine Compartment Heat Transfer
AUTHOR(S): Ernst Peter Weidmann - FKFS Stuttgart; Jochen Wiedemann - IVK/FKFS Univ.; Thomas Binner - DaimlerChrysler AG; Heinrich Reister - DaimlerChrysler AG
http://www.sae.org/servlets/productDetail?PROD_TYP=PAPER&PROD_CD=2005-01-2045
CAE Approach for Thermal-Acoustical Protective Shields
SAE Document Number: 2001-01-0684
Meeting Where Presented: SAE 2001 World Congress, March 2001, Detroit, MI, USA, Session: Sealing
AUTHOR(S):
Mark X. Boogemans - Dana Canada Inc.; Colin Chen - Dana Corp.; Calin Matias - Dana Canada Inc.; Frank W. Popielas - Dana Corp.; Marsha Minkov - Dana Corp.; Ryan Moffat - Dana Corp.
http://www.sae.org/servlets/productDetail?PROD_TYP=PAPER&PROD_CD=2001-01-0684
CAE Approach for Thermal-Acoustical Protective Shields-Part 2
SAE Document Number: 2004-01-2970
Book Number: SP-1901
Meeting Where Presented: 2004 Powertrain & Fluid Systems Conference & Exhibition, October 2004, Tampa, FL, USA, Session: SI Engine Experiment (Part A&B)
AUTHOR(S): Ching-Ho Chen; Frank W. Popielas - Dana Corp.; Rohit Ramkumar - Dana Corp.; Anthony M. DiGregorio - Victor Reinz; Mark X. Boogemans - Dana Canada Inc.; Harald Rebien - Dana Corp.
http://www.sae.org/servlets/productDetail?PROD_TYP=PAPER&PROD_CD=2004-01-2970
Investigation of a Coupled CFD and Thermal Modelling Methodology for Prediction of Vehicle Underbody Temperatures
Document Number: 2005-01-2044
Meeting Where Presented: Vehicle Thermal Management Systems Conference & Exposition, May 2005, Toronto, ON, CANAD, Session: Engine and Engine Compartment Heat Transfer
AUTHOR(S): Ed Bendell - Rieter Automotive
http://www.sae.org/servlets/productDetail?PROD_TYP=PAPER&PROD_CD=2005-01-2044
Underhood Temperature Analysis in Case of Natural Convection
Document Number: 2005-01-2045
Meeting Where Presented: Vehicle Thermal Management Systems Conference & Exposition, May 2005, Toronto, ON, CANAD, Session: Engine and Engine Compartment Heat Transfer
AUTHOR(S): Ernst Peter Weidmann - FKFS Stuttgart; Jochen Wiedemann - IVK/FKFS Univ.; Thomas Binner - DaimlerChrysler AG; Heinrich Reister - DaimlerChrysler AG
http://www.sae.org/servlets/productDetail?PROD_TYP=PAPER&PROD_CD=2005-01-2045
Vehicle Paint Radiation Properties and Affect on Vehicle Soak Temperature, Climate Control System Load, and Fuel Economy
Document Number: 2005-01-1880
Book Number: SP-1945
Meeting Where Presented: SAE 2005 World Congress & Exhibition, April 2005, Detroit, MI, USA, Session: Thermal Systems Modeling
AUTHOR(S):
Paul B. Hoke, Chris Greiner - Ford Motor Co.
http://www.sae.org/servlets/productDetail?PROD_TYP=PAPER&PROD_CD=2005-01-1880
An Efficient Procedure for Vehicle Thermal Protection Development
Document Number: 2005-01-1904
Book Number: SP-1956
Meeting Where Presented: SAE 2005 World Congress & Exhibition, April 2005, Detroit, MI, USA, Session: Reliability and Robust Design in Automotive Engineering - Automotive Aero-Thermal & Fluid Systems
AUTHOR(S): Kumar Srinivasan, George M. Woronowycz, Michael Zabat, John M. Tripp - DaimlerChrysler Corp.
http://www.sae.org/servlets/productDetail?PROD_TYP=PAPER&PROD_CD=2005-01-1904
Simulation of Radiation Effects in the Presence of the Exhaust System
Document Number: 2005-01-2060
Meeting Where Presented: Vehicle Thermal Management Systems Conference & Exposition, May 2005, Toronto, ON, CANAD, Session: Modeling of Thermal Systems
AUTHOR(S): Thomas Moshammer - Magna Steyr Fahrzeugtechnik
http://www.sae.org/servlets/productDetail?PROD_TYP=PAPER&PROD_CD=2005-01-2060
Other publications are known to have been submitted for publication, but are not yet released. If you have questions or know of a published article relating to RadTherm software that is not yet listed here, please contact us.
Learn More about RadTherm
Download company and product brochures. Brochures are presented in PDF format and require Adobe Acrobat Reader.
ThermoAnalytics software is regularly featured in infrared analysis technical papers published by SPIE, the optical engineering society. Read some of these papers in this section.
ThermoAnalytics software users regularly publish technical papers or give conference presentations featuring our software's results. Read some of these papers in this section.
