You can obtain fluid temperatures by three methods in the post processor.

1. Go into the post processor. You will be switched to element select mode.
2. Change to part select model using the button bar or right-click in the graphics window.
3. Open the parts list Windows>Parts List
4. Select the desired fluid name.
5. The temperatures are displayed in the results window.

You can also plot the temperature of fluid parts:
1. Follow the steps above but choose the subtab Plot/Export in the Post Processor.
2. Add the parts to the "Data to be plotted" window by clicking on their names in the parts list.
3. Click Plot (or "Export", if you are exporting the data).

You can also view the fluid temperatures as a boundary condition on the part geometry.
1. In the post processor, switch to element select mode.
2. Click on an element in the graphics window.
3. Select the Results>Boundary Conditions sub-tab.
4. You can view the fluid temperature and convection coefficient in the graphics window.